BE UP THERE. WITH BE UP HIRE.  ·  Bayswater depot · Melbourne-wide
Mon–Fri 7am–5pm · Machine swapped out within 24 hours if any breakdown
Home › Guides › Harness in a scissor lift?

Do you need a harness in a scissor lift? (Australian rules)

By the Be Up Hire team · Updated July 2026
Under general Australian practice: in a scissor lift, no — the guardrails are the engineered fall protection, and a harness isn’t normally required. In a boom-type EWP, a harness is mandatory. The big “but”: site rules can require a harness anywhere, and they override the general position.

Why don’t scissor lifts normally need a harness?

Because the platform itself is the fall protection. A compliant scissor lift has full guardrails, mid-rails, toe boards and a gated or chained entry — you’re working inside a fenced box. Australian practice treats that guardrail system as the primary control, so an additional harness generally isn’t required for normal use with the gate closed and both feet on the deck. That’s one reason scissors are the default for crews: no harness admin, no anchorage checks, and no high-risk licence in Victoria either (see the licence guide).

Why is a boom lift different?

A boom can catapult. When a boom-type EWP drives over a pothole or gets clipped, the long arm whips the basket hard enough to throw an operator clean over the rails — guardrails don’t help with that. So in boom-type EWPs, a harness with a short lanyard connected to the basket’s anchor point is mandatory, full stop. If your job needs a boom, budget for harnesses and make sure everyone using it is trained in them.

Quick reference

SituationHarness required?
Scissor lift, normal use, gates closedGenerally no — guardrails are the control
Boom-type EWP (knuckle, stick, trailer-mounted)Yes — mandatory
Any EWP where site rules say “harness”Yes — site rules win
Scissor lift used in a non-standard way (gate open, leaning out)Don’t do it — and if a task genuinely needs it, it needs a specific risk assessment first

When do the exceptions kick in?

What should I actually do before the job?

Three checks, two minutes: read the site’s EWP rules from the induction paperwork; if any boom is involved, count harnesses and confirm training; and if anything about the task means leaning past the rails, stop and rethink the machine choice — often a taller scissor from hire by height puts the work inside the rails instead. This guide is general information, not legal advice: confirm current requirements with WorkSafe Victoria guidance before your crew relies on it.

Common questions

Can I wear a harness in a scissor lift anyway?

If the platform has a rated anchor point, yes — clip to that, never to the rails. Some crews standardise on harnesses across all EWPs to keep the rule simple, which is a perfectly sensible policy.

Is a trailer-mounted cherry picker a boom for harness purposes?

Yes — it’s a boom-type EWP, so harness rules apply in the basket. Our 35ft trailer cherry picker is $250/day ex-GST on the rates page.

Do you supply harnesses with the machine?

Ask when you book — we’ll make sure you’re not caught short on delivery morning. Call 1300 806 577 and we’ll sort the whole kit.

Where is the official rule written down?

Start with current WorkSafe Victoria guidance on elevating work platforms and the machine’s operator manual. Site-specific requirements live in your site’s safety management plan. When they differ, follow the strictest one.

Want the machine that skips the harness paperwork?

If the work is straight up, a scissor usually does it with no harness and no licence — tell us the job and we’ll confirm.

Call 1300 806 577
📞 Call now Get a quote